vic3d Posted October 27, 2013 Report Posted October 27, 2013 I have to do a lot of videos of roads and ramps full of traffic like the beginning of this video. But bullet just doesn't seem to collaborate with the path and ramp I draw. Please help, I have no time to spare. Vic. Quote
RichardJoly Posted October 27, 2013 Report Posted October 27, 2013 Why do you have only one wheel in the back? Can you post the project, I'll take a look at it. Quote
fantomaz Posted October 27, 2013 Report Posted October 27, 2013 Hi Vic, yes, please post the prj, i will also have a look. But first add a forth wheel, i think without it the plug will not work correct. Alex Quote
vic3d Posted October 28, 2013 Author Report Posted October 28, 2013 https://www.dropbox.com/sh/jzjl8320z3asnpx/6P5oa3YSYn I'll add the wheel, but I really don't think that is the problem. Maybe there is an easier way to do this: what I need is to be able to draw the path in plan view, also use it to determine the speed with the path in the timeline. All I need from bullet is help so that the cars follow the ups and downs of the ramps, that is the part I don't want to have to do by hand. Also that the cars follow the path rotating correctly. I don't even need the wheels to turn, the camera will be too far away. Thanks. Vic. Quote
fantomaz Posted October 28, 2013 Report Posted October 28, 2013 Hi Vic, i had some trouble to dl the folder, now i got it. Tomorrow after midday i have the time to look for it. Alex Quote
RichardJoly Posted October 29, 2013 Report Posted October 29, 2013 Sorry, I have very little time to test but I diced your road to give Bullet more geometry to work with, changes the friction a bit and limited the speed to 500 instead of 1000. The car is following the path more closely. It still needs a lot of tweaking but this should get you started... PRUEBA 1R.zip Quote
vic3d Posted October 30, 2013 Author Report Posted October 30, 2013 Thanks for the help guys. I'll keep working on it. Quote
vic3d Posted October 30, 2013 Author Report Posted October 30, 2013 Is there a way to have the car just follow the path, rotating left and right and up and down, without using bullet? That would be enough for this project. Quote
RichardJoly Posted October 30, 2013 Report Posted October 30, 2013 On top of my head... Pathfinder? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.