davidwu67 Posted January 14, 2010 Report Share Posted January 14, 2010 Hi, This morning, I installed a Bonjour update form software (the one which is supposed to improve communication with the Apple TV). After that Renderama no longer works! Always get a Master/Slave communication error. 10.6.2 Mac pro. Everything was fine just yesterday. -David Quote Link to comment Share on other sites More sharing options...
Arketype Posted January 14, 2010 Report Share Posted January 14, 2010 David, Are you using a static IP address on the computer running 'Rama? Dave Quote Link to comment Share on other sites More sharing options...
davidwu67 Posted January 14, 2010 Author Report Share Posted January 14, 2010 David, Are you using a static IP address on the computer running 'Rama? Dave Yes, static IP. And same error message on both local slave and remote slaves. Quote Link to comment Share on other sites More sharing options...
Arketype Posted January 15, 2010 Report Share Posted January 15, 2010 You can try deleting all of the slaves from the Rama window and then set them up again from scratch You may also want to try setting different port numbers too. Check out http://support.apple.com/kb/TS1629 Just to make sure you don't have the Slaves on port numbers in use by other networking services ;) If this does not work, I would re-install the Slaves. Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.